Manage Consent
Functional Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.
The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Manage Consent
Functional Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.
The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Application
| Your application has been submitted!
If you have a resume file that you would like to give us, please do so here. Otherwise, you can close this window. Resume File:
(NOTE: Your file will not upload unless you fill our your name. A Success Message will display after upload is complete. Do not close window until the Success Message is displayed.) |
|
|
Request Services
|
Your service request has been submitted! If you have any supporting files that you need to give us, please do so here. Otherwise, you can close this window. Supporting Files: (NOTE: Your file will not upload unless you fill our your business name. A Success Message will display after upload is complete. Do not close window until the Success Message is displayed.) |
|
|
ATC Group Services
Our firm offers comprehensive expertise in air, land, and water combined with full design, project management, and implementation services to handle any challenge from consulting to completion.
Every project starts with identifying the best way to achieve our clients’ goals and addressing the issues inherent to their facilities and needs. This involves understanding not only their business objectives, but also the political and stakeholder concerns that go along with managing and resolving environmental issues.
Our diverse, multi-disciplinary staff brings a breadth of technical knowledge and experience to this task so we can respond to project demands promptly and accurately.
ATC also offers the distinct advantage of having a local presence, fully backed by a network of subject matter experts from around the world. We have the geographic coverage and range of offerings to support every project.
Expect Excellence.
Call 1-877-282-4756 for more information!
Protective Technologies, Inc.
From 1988 through 1998 hundreds of thousands of steel tanks were upgraded with corrosion protection. Many millions were invested by tank owners to extend the useful life of these tanks. The question is; “How well are you protecting your investment?”
Maintaining regulatory compliance is expensive. However, the failure to do so can be financially devastating. Ongoing compliance requires vigilance, detailed record-keeping, and occasional maintenance.
The staff at Protective Technologies has provided corrosion protection services and consulting for nearly 30 years and has a thorough understanding of the rules to help you to avoid regulatory and financial difficulty.
Call 803-424-0412 for more information!
Protective Technologies, Inc. Website
A-1 Petroleum Services, Inc.
A-1 Petroleum Services provides comprehensive support for gasoline stations in the Carolina’s. The staff at A-1 Petroleum is trained by leading equipment manufacturers to install, repair, and maintain all aspects of your service facility. A-1 Petroleum offers 24-hour service with well-stocked trucks to respond quickly and efficiently to your needs, keeping your down time to a minimum.
A-1 Petroleum strives to retain customer loyalty. Its commitment to excellence and quality workmanship make it a leader in the service industry.
Call 704-399-6995 for more information!
A-1 Petroleum Services, Inc. Website
Petroleum Equipment and Service
Petroleum Equipment & Service, Inc. is a full-service company offering complete sales, installation, and service of petroleum equipment and convenience store fueling systems. Petroleum Equipment & Service, Inc. also offers a complete environmental division to assist in environmental requirements.
Call 704 335-8801 for more information!
Petroleum Equipment & Service, Inc. Website
HCN Petroleum Equipment
We have a highly trained sales and technical staff, along with a wide range of equipment and parts. We understand the need for quality, competitive prices, and quick delivery to help protect your bottom line. Our sales staff is customer-oriented and here to assist you with any need you may have. We maintain a fully stocked warehouse for all our convenience store and petroleum equipment needs.
Call 828-733-3731 for more information!
HCN Petro Website
TotalSIR
For 25+ years, TotalSIR has been helping tank owners comply with monthly leak detection regulations. TotalSIR consistently ranks #1 in customer service and believes monthly UST compliance should be simple and affordable.
Call 800-533-2481 today and let us help!
TotalSIR Website
Fuel Treatment Program
The problem of water in tanks is a constant issue. Where did it come from? How did it get into my tank?
Leaving the water can contribute to the harmful growth of bacteria and corrosion that can damage the tanks; but the fuel itself is “DIRTY” can selling to your customers can cause issues.
If your tanks have sediment, ATG probes are “gunked” up and customers complaining of DIRTY fuel; allow our certified and experienced technicians to come out, pull a tank sample and show you what our fuel treatment service can do.
The proof is in the pictures!
With this service, we remove the water from the tank and treat the diesel/gas with cleaning additives. These additives bring all of the sludge/debris to the bottom and our technician will then pump from the bottom of the tank. While on site we also inspect all tank top openings for potential points of water intrusions and make repairs if they are equipped to do so. Below is an example of what a dirty tank looks like before and after our fuel treatment.
UNLEADED (T1) – BEFORE |
|
|
UNLEADED (T1) – AFTER |
|
|
Inspection
PS&C certified technicians will perform a visual inspection of your dispenser, transition, and tank top areas. Our inspections occur with full documentation of your problem areas, along with picture documentation for supporting help.PS&C works in conjunction with many service companies within our areas of service to allow you adjoining support of getting the areas of concerns and problems resolved and cleaned up!!
NC Inspectors Map
SC Inspectors Map
Our program is designed to allow us up front communication with your designated or assigned inspector. We will work with your inspector to set up the time and date of your required inspection. PS&C will meet your state inspector on site and assist in the inspection process.
PS&C technicians are punctual, professional, and knowledgeable. They ensure that the inspections proceed quickly and safely.
Standard Meter Calibration
Companies and their customers rely on accurate gasoline measurement for many reasons.
Perhaps the most important is fair and equitable payment for gas delivered. In addition to the financial consequences of measurement errors, there can be other adverse effects related to operational, safety, legal and environmental issues. Furthermore, once an error is discovered, the parties’ business relationship can be strained or there can be costly litigation.
Gasoline Meter Calibration ensures accuracy at each and every dispenser unit. Feel safe knowing that each unit is precisely calibrated and within state tolerances.
Class AB Operator Inspection
All facilities must have operators trained by August 11, 2011.
Allow PS&C to become a certified trained operator for your facilities. Quarterly, or Monthly, our certified technicians will visit your locations and complete the Inspection.
During our visits you will receive documentation of any employee(s) that are currently not certified or hold a certificate on file to meet the requirements of this state.
PS&C will complete an overall inspection of your site and submit to you the required Class AB Operator Log showing your quarterly inspection to be complete.
PS&C can also assist and develop a personalized Emergency Response Placard, which is a requirement to visually have available at each site.
Monthly Walkthrough Inspections
We offer the monthly walkthrough inspections for VA, NC, SC, GA, TN, KY, and IN.
This is a monthly inspection of your spill buckets and all other release detection equipment used on your site.
Our certified and qualified technicians can perform this service for you. We also offer onsite training walking you through the inspection form and answering any questions you may have concerning the proper inspection requirements.
NC (UST-27)
SC (DHEC Form 2213)
TN (RDA 2304)
Stage One Vapor Recovery
Tank
Having issues with a tank. PS&C can help you solve these issues.
In many cases, Tank testing is becoming a service of the “past”, with the inception of interstitial and continuous monitoring. However, this service can serve as your primary “problem” solving defense for those tanks that you just can’t get to pass.
PS&C offers this service using the Estabrooks Ezy 3 Locator System. Tanks can be tested anywhere from 0% to 99% full.
If you have received a violation or would like to eliminate their occurrence then call PS&C today:
Toll Free 877-479-8152
Spill Bucket
Spill buckets are the primary source of spill containment at your fill risers. They are required to be tested tri-annually.
PS&C offers visual, hydrostatic, and vacuum testing for all makes/manufacturers.
Sensor
An electronic device that can detect the presence of water, liquid product, product vapors or a loss of pressure or vacuum in the interstitial space of a tank, tank top sump, fuel dispenser sump, or observation well.
Have you had an upgrade to your location? Are you having your sensor(s) tested annually?
All new and replacement UST systems (tank, piping, submersible pumps, dispensers) must be secondarily contained with interstitial monitoring.
With these new federal and state regulations, sensor testing is becoming a major part of your required annual testing requirements at your sites.
Vac Truck (PCW / Water Removal)
PS&C now offers pumping of PCW water on site from all small containments (no-tank pumping). With this new addition to our fleet, PS&C strives to offer our customers quality services that meet current needs in our industry. Proper manifesting and transportation to disposal facilities is our standard.
PS&C is quickly becoming your one source for meeting all solutions that keep the environment uncontaminated, protection for your working components and offering you our customer the peace of mind in knowing your site is ready for your state inspections.
PS&C links this truck with our pre-inspection & inspection program; which allows our technicians to visit your sites before scheduled state inspections and then returning to meet the state inspector on site to assist.
Our proven safety and compliance relationship with you our customers shows exceptional record in this addition to our fleet.
Call today to discuss our preinspection & inspection program; linked with this new truck!
Overfill Prevention Device
PS&C certified technicians can verify your overfill, as well as repair the issues.
You can have (3) types of overfill equipment at your site; Automatic Shut Off Devices, Ball Floats, and/or Electronic Overfill Alarm
Our technicians are qualified to test any of these types of overfill equipment. If something fails we are more than happy to discuss the issues and offer repair options.
Line-Pressurized or Suction
PS&C technicians specialize in testing your pressure or suction lines, utilizing the Estabrooks EZY CHEK PRODUCT LINE TESTER.
In addition to these generalized requirements, testing must be conducted in accordance with the manufacturer’s requirements.
EZY-Chek Manual Line Leak Detector (for Rigid Pipelines) — Certification: Leak rate of 0.1 gph with PD = 98.0% and PFA = 1%.
Leak Threshold: 0.05 pgh. A pipeline system should not be declared tight if the test result indicates a loss that equals or exceeds this threshold.
– Maximum pipeline capacity of 426 gallons.
EZY-Chek Manual Line Leak Detector (for Flexible Pipelines) — Certification: Leak rate of 0.1 gph with PD = 99.8% and PFA = 0.2%.
Leak Threshold: 0.05 pgh. A pipeline system should not be declared tight if the test result indicates a loss that equals or exceeds this threshold.
– Maximum pipeline capacity of 101 gallons (example: 275 feet of 3 inch line).
UST-Comp allows you the customer to have detailed description of the type of piping, piping configuration, and the condition.
Line testing can be conducted in conjunction with a tank or leak detector test eliminating additional cost for a returned trip charge!!
Leak Detector
Whether you have MLLD(s) or PLLD(s), PS&C technicians are certified to complete your annual testing requirement.
PS&C utilizes the Estabrooks EZY CHEK LEAK DETECTOR TESTER.
The leak detector tester is connected into the emergency valve under the dispenser. Pressure and leak rate adjustments are made to determine if the in-line leak detector and functional element are operating to the manufacturer’s specifications.
MLLD(s) and/or PLLD(s) are tested to ensure that the LD passes a 3.0 gallon per hour (GPH) test.
Leak Detector testing can be conducted in conjunction with a tank or line test eliminating additional cost for a returned trip charge!!
Helium
PS&C technicians can “pin-point” the problem saving you thousands of $$$ in excavation cost. This helps you in securing fast repairs and saves you down time and expense.
Our helium testers can speed up the process of your repairs by pinpointing the location of the leak.
We utilize the Mark Model Helium tester allowing us to trace and find leaks in underground storage tanks and fuel lines.
Containment Integrity
Containment sumps are one of your first protective defenses for pumps, piping and tank tops. These containments consist for UDC(s) & STP(s).
Containment sumps should be water tight, free of breaches and holes, making them durable against allowing product to enter the ground and environment should a leak occur.
Containment sumps serve a variety of functions:
– Containing leaks from submersible turbine pumps and piping components within the sump.
– Collecting and containing leakage from double-walled piping that enters the sumps.
– Containing spills that may occur during maintenance activities associated with components within the sumps.
– Keeping groundwater away from the components with the sumps in areas of high water tables.
– Isolating components from corrosive effects of subsurface moisture and soil.
According to the PEI/RP 900-08 manual there is a checklist that should be performed for containment sumps.
1. Any water or product removed properly
2. Sump is free of cracks, holes, bulges & other defects
3. Penetration fittings are intact and secured
PS&C can perform this check list for you. Our UST-Comp standard operating procedures performs both the visual inspection, as well as, the hydrostatic test for your sumps.
With the new Federal rules containment sump must be tested every three years if you are doing interstitial monitoring on the site.
PS&C has a fleet of small pump trucks to aid in this testing and giving you a cost savings.
Cathodic Protection
PS&C specializes in testing of either:
– Impressed Current Systems
– Galvanic (Sacrificial Anode) Systems
State & Federal regulations require both types of systems to be tested on a triennial basis. With our UST-Comp system; you will never have to worry about tracking that triennial date again. We will do this for you!!
Automatic Tank Gauging System
Automatic Tank Gauge System can perform many functions for your store.
– Tank & Line Testing Function
Monitors the product levels in each tank to determine a leak
Monthly documentation: Obtained showing a “pass/fail” result
– Sensor Monitoring
Monitors the interstitial sensors to determine a leak
Sensor Status Report can be printed and recorded
Must do annual inspections of the ATG if you are using for monthly monitoring.
Yearly testing of this system allows for accurate readings and results to be obtained.
Our inspection process and results include the state’s documentation.
ATG Connectivity, Software and Communication Card installation is available.